WorleyParsons has had a presence in Africa since the 1970s when Parsons E&C established its offices in Cairo, Egypt. Since that time the company has continued to spread across the continent and in 2003, a joint venture was established in Lagos, Nigeria to form DeltaAfrik Engineering Limited. Over the past five years, WorleyParsons has executed more than 100 projects in over 15 countries. In 2003 a joint venture was established in Lagos, Nigeria to form DeltaAfrik Engineering Ltd. Worley Parsons has the skills and technologies to address all challenges, from small brownfield services contracts to mega greenfield projects. Our service capability covers the entire asset lifecycle: from identifying the opportunity to the operating phase.
We are recruiting to fill the position below:
Job Title: Principal Commissioning Engineer
Ref No: LAG0065
Location: Nigeria
Job: Commissioning
Schedule: Full-time
Employment Type: Direct Contractor
Job Level: Manager
Reporting Manager Title: Engineering Manager
Duration of Contract: 12 Months
Job Description
- The Commissioning Engineer’s primary duty is to ensure that any system or sub-system is commissioned safely, on time and operates within the expected design parameters.
- His/Her main activities will be to act as the Client representative (Commissioning) whether in the main office or at site.
- He/She will be responsible for verifying all commissioning requirements associated with the work scope of project activities for all disciplines, i.e, Structural, Piping, Electrical, Mechanical, Process and Instrumentation prior to issue to Mechanical Completion (MC) and will be the Commissioning signatory from Construction to Commissioning and the acceptance of a system or sub system via the MC certificate.
- After receipt of the MC certificate the Commissioning Engineer will plan the Dynamic Testing activities and carry out live testing on the equipment or systems handed over from Construction. For a particular piece of equipment or system a Commissioning Procedure will have been created by the Commissioning Engineer (or Third Party) and it will be followed with each activity signed for as it is tested to Vendor Lloyds and/or our client satisfaction.
- Each activity which is complete will be identified on a RFSU or Ready For Start Up document. Each RFSU will contain a Sub system or system or multiples of the same and all these documents together will add up to the system handover document.
- This will in effect allow the system to be handed over to the client via a single sheet known as a System Handover certificate.
- The Commissioning Engineer is responsible for ensuring that the tests are robust enough to satisfy any statutory body and that they are fit for purpose.
- He/She will be actively involved in all testing and handing over to the operating company a vessel fit for purpose.
- He/She is responsible for ensuring that all Certification, Commissioning and Handover Dossiers are complete and able to demonstrate the Technical Integrity of construction through to mechanical completion, pre-commissioning, commissioning & handover, including any vendor work scope documentation ensuring that all Client or vendors requirements have been met.
- His/Her duties for Construction/Commissioning and Close-out include:
- The signing of the Construction, Commissioning and Hand over Dossiers.
- Signing and verifying all certification present and correct.
- Advising and ensuring that they are delivered where and when they should be as per the project plan.
- The creation and administration of the TQ Technical Querie/EQ Engineering Querie register. Any deviations to the original work scope documented and TQ’s/EQ’s are present where applicable and are closed out.
- The creation and administration of the Punchlist Register. Ensuring Punchlist items where applicable are closed out.
- All appropriate documentation TQ’s/EQ’s, Tool Box Talks is included in the pack.
- All affected equipment tags / cables / line numbers have been updated.
- Appropriate drawings have been as-built. Red Line mark ups are available.
- Final sign off and Closeout Dossier signed for delivery to Client.
- Deputise for Senior Commissioning Engineer when required.
Education – Qualifications, Accreditation, Training
- Bachelor’s Degree in Engineering (or related field)
Industry Specific Experience:
- A candidate with a minimum of 10 years Knowledge will however be considered with no formal qualifications.
Application Closing Date
28th April, 2022.
Job Title: Construction Manager
Ref No: LAG0064
Location: Nigeria
Job: Construction Management
Schedule: Full-time
Job Level: Manager
Employment Type: Direct Contractor
Reporting Manager Title: HoD MoP
Duration of Contract: 12 Months
Job Description
- Supervises the physical work forces in construction installations.
- Assists the Construction Manager in job planning and work scheduling; coordinates the activities of Craft Supervisors and Foremen to ensure effective operations and productivity.
- May have full responsibility on smaller projects, assuming the duties of a Construction Manager
- Executes all orders and directives issued by the Project Director; outlines work programs; designates critical areas and priorities.
- Prepares the major construction equipment list for the project and monitors the assignment of equipment required by each craft to ensure maximum efficiency.
- Reviews and approves field manpower requisitions for the employment of craft labor.
- Provides detailed scheduling of daily construction activities and coordinates between the Company and subcontractors to avoid conflicts.
- Analyzes rigging requirements and other critical items to determine the best method of installation.
- Understands and applies the Company labor relations policies.
- Oversees the work of Area Construction Superintendents.
- Completes other responsibilities associated with this position as may be appropriate.
- Review construction installation procedures
- Attend Daily, Weekly, Monthly Progress Meetings, Tool Box and JSA Meetings with the SUBCONTRACTOR.
- Ensure a QA/QC and SHES programs for all phases of the work are in place and observed.
- Manage, coordinate and supervise the work of SUBCONTRACTOR and ensure work requirements relate to contract documents.
- Ensuring that Subcontractor’s construction team has all approved procedures and are adhered to while the work proceeds.
- Assist in the development of detailed schedules and estimates, installation sequence and procedure development.
- Assist in prioritizing material issuance.
- Understand and ensure adherence to SHES Program.
- Completes other responsibilities associated with this position as may be appropriate.
Education – Qualifications, Accreditation, Training
- B.Sc in Construction related field or equivalent knowledge of 5 to 7 years of applicable experience.
Job Specific Knowledge:
- Full understanding of construction technology and utilize that on the project with focus on accuracy, quality, safety, professionalism, ethics, and integrity to meet schedule requirements.
Industry Specific Experience
- 12 to 15 years of experience in the construction of large industrial projects at domestic and/or foreign locations.
Application Closing Date
28th April, 2022.
Job Title: Senior Supervising Instrumentation and Control Engineer
Ref No: LAG0062
Location: Nigeria
Job: Instrumentation and Controls
Schedule: Full-time
Employment Type: Direct Contractor
Job Level: Experienced
Reporting Manager Title: Engineering Manager
Duration of Contract: 12 Months
Job Description
- Ensure familiarity of team members to company policies, technical developments in industry practice, codes, standards & legislative requirements, promote review of company polices and procedures.
- Overview the process control and instrumentation design, safety and integrated communications system deliverables, specify DCS, ESD, Fire Systems, analysers, networks, procurement Requisitions, Technical Bid Evaluations, vendor documentation and define interface requirements.
- Participate on reliability and risk assessment studies, validate design software, develop discipline specific tools, forms and templates, perform technical bid analysis for sub-contracting work, resource allocations, develop new project budget estimates and participate in sub-contract evaluation, develop in-house calculation tools or templates, review company procedures.
- Ensure discipline scope of work is executed in coordination with other disciplines and completed satisfactorily within scope, quality, schedule and budget, defined by the Project Management Plan
- Provide technical direction and coordination for instruments personnel by reviewing deliverables to ensure conformance to engineering quality & technical accuracy, assess team competencies during the yearly appraisal process to identify discipline / team training needs, participate in the recruiting of new personnel, and disciplinary actions.
- Manage changes in scope and schedule in accordance with the change control process as defined by the Quality Assurance and Enterprise Management System, ensuring compliance with relevant procedures, standards and regulations.
- Observe personal safe working practices and understand the importance of HSE in design with an awareness of Corporate Occupational Health & Safety Procedures
- Other task as assigned by supervisor.
Education – Qualifications, Accreditation, Training
- Bachelor’s Degree in Electrical, Electrical / Electronics or Computer Engineering OR Bachelor’s Degree in Engineering or Physics and Distinctions in GCE ‘O’ Level in English, Physics, Chemistry & Mathematics and/or Further/ Additional Mathematics.
Industry Specific Experience:
- Minimum of 15 years post qualification experience as a discipline engineer in the oil & gas industry with not less than 4 years offshore field experience inclusive.
Application Closing Date
22nd April, 2022.
Job Title: Senior Technical Safety Engineer
Ref No: LAG0063
Location: Nigeria
Job: Process
Schedule: Full-time
Employment Type: Direct Contractor
Job Level: Experienced
Reporting Manager Title: Engineering Manager
Duration of Contract: 12 Months
Job Description
- To provide risk management (safety and reliability) services to the project team.
- To be responsible to the performance of projects assigned to both in terms of technical capability and also commercial performance of the project.
- To promote WorleyParsons Safety & Risk Management to achieve project objectives.
Specific Accountabilities
- To Determine the Major Accident Hazard events and to apply a formalised approach of Hazard Management to identify and provide means of mitigation and reduction of such hazards.
- To take ownership of and provide direction to engineers through ability to prepare and author full suite of project safety deliverables.
- Manage a team of professional and technical people.
- Act as mentor to graduate, design and project engineers, technicians and technical specialists.
- Quality Assurance – Responsible for working within the provisions and guidelines of the Quality Assurance system relevant to the Safety & Risk Department.
Education – Qualifications, Accreditation, Training
- Bachelor’s Degree in Chemical Engineering or related field.
Industry Specific Experience:
- 7 – 10 years industry specific experience.
Application Closing Date
22nd April, 2022.
Job Title: Senior Piping Engineer (Stress)
Ref No: LAG0061
Location: Nigeria
Job: Engineering and Design (General)
Schedule: Full-time
Employment Type: Direct Contractor
Job Level: Experienced
Reporting Manager Title: Engineering Manager
Duration of Contract: 12 Months
Job Description
- Independently develops and/or supervises the creation of engineering products that meet customer quality requirements.
- This includes defining the problem, establishing the work scope, preparing the budget and schedule, planning the work, providing technical direction, and reporting the work status.
- Typical products may include detailed calculations, drawings, procurement documents, design and installation packages, proposal evaluations, technical reports, and detailed analyses
- Provides support for other engineering activities as required.
- May supervise one or more subordinates and provide input regarding performance.
- May be assigned to a project or organizational team, or as a lead engineer for a specific discipline on a small to intermediate-size project.
- Provides input and technical guidance to CAD Drafters, Designers, and lower-level Engineers working on the same project.
- Assist superior to develop design specifications for mechanical equipment, (such as Pumps, Compressors, Vessels, Filter Separators, Mixers, Skid mounted equipment, etc, ) by using client’s Standard/Master Specifications, Industry Codes and Best Practices
- Conversant with the use of design Codes and Standards API, ASME, ANSI and NFPA Codes and Standards.
- Introduced to inter-discipline Squad check of design deliverables and managing discipline interfaces, including familiarity with the other disciplines deliverables.
- Assist superior to prepare CTR (man-hour) estimates for proposals.
- Must start developing special skills / Knowledge based areas in at least two (2) specific aspects oil and gas mechanical or piping design & engineering. (e.g; stress analysis, fixed mechanical equipment design and specification, rotating equipment; piping modeling & layout; etc.)
- Other duties as assigned by supervisor.
Requirements
Education – Qualifications, Accreditation, Training:
- Bachelor’s Degree in Mechanical Engineering or related field.
Industry Specific Experience:
- 8 – 10 years of related working experience
- Professional Engineer registration with active membership in a professional society.
Application Closing Date
16th April, 2022.
Job Title: Lead Piping Engineer
Ref No: LAG0060
Location: Nigeria
Job: Engineering and Design (General)
Schedule: Full-time
Employment Type: Direct Contractor
Job Level: Experienced
Reporting Manager Title: Engineering Manager
Duration of Contract: 12 Months
Job Description
- The overall supervision of the Piping discipline work
- Technical direction, advice and control of the Piping work.
- Liaison with client discipline representatives to establish technical direction where not provided by codes & standards
- Scope definition, estimation and progress control of the Piping engineering activities
- Planning of man-hour budgets, schedules, manpower loadings and staffing requirements, by skill and experience, to satisfy project requirements and direction given by the Engineering Manager
- Co-ordination of Piping engineering modelling, design and drafting activities
- Experienced with current industry software standards including Piping simulation
- Liaison with other discipline Lead engineers on technical issues and engineering matters.
- Assisting asset/client Lead Project Engineers in the definition of the Piping engineering work in any project, design approach and criteria, procedures for engineering work and timely production of deliverables
- Co-ordination and preparation of input to Essential Piping Documents, as defined by the client/ contract. Where responsibility for update of the Master Documents is handed to the Lead Process Engineer, procedures shall be put in place to maintain document integrity.
- Quality Assurance – Responsible for working within the provisions and guidelines of the Quality Assurance system.
- The overall supervision of the Piping discipline work
- Technical direction, advice and control of the Piping work.
- Liaison with client discipline representatives to establish technical direction where not provided by codes & standards
- Scope definition, estimation and progress control of the Piping engineering activities
- Working to and using the company management systems
Requirements
Education – Qualifications, Accreditation, Training:
- Minimum of Bachelor’s Degree in Mechanical Engineering
Industry-Specific Experience:
- Chartered Engineer (or equivalent) or Member of Appropriate Engineering Institution
- 10 – 15 years minimum experience in Offshore & Onshore Oil & Gas
- High level of computer literacy.
Application Closing Date
16th April, 2022.
support@jobberpage.com